iPV V3-mini kit – again, the designers are original

iPV V3-mini kit - again, the designers are original

iPV V3-mini kit – again, the designers are original

Our second guest could also be called AIO, but my language doesn’t dare to do it. Therefore, he will go with us, as it were, outside the “competition”, or rather a marathon. Although it should be noted that the manufacturer has recorded it in the section of all-in-one devices. I propose to start acquaintance without unnecessary snot, because there is something to talk about.

iPV V3-mini kit

Dimensions: 78 x 46.2x mm
Weight: unknown
Case material: zinc alloy + plastic
Power: built-in 1400mAh
Chipset: YiHi SX635J Bottle
capacity: 2 / 3.5ml
Output power: 6 – 25W
Voltage range: 3.2 – 4.2V
Operating Mode: POWER, TC
Temperature range: 356 ℉ – 500 ℉ / 180 ℃ – 260 ℃
Supported resistance: probably from 0.3Ω
Protection: from low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: own
Screen / diagonal: yes
Micro -USB port / charge: yes, charging current unknown
Update / firmware: yes
Color: see photo below

iPV V3-mini kit - again, the designers are original ...


Case material: stainless steel
Atomizer type: maintenance-free
Evaporators: 0.3 / 1.0Ω
Capacity: small
Diameter: 14mm
Height:28.1mm with drip type
Connector: 510, pin is gold-plated
Weight: unknown
Color: only one color

Options (probable)
– V3-mini mod
– Elf ADA 2pcs 0.3 / 1.0Ω
– cartridge for liquid 3pcs (one preinstalled)
– USB cable
– manual the user
– warranty card.

The most pleasant moment for me is the design, and in particular the form factor. Once again, I hasten to say “bravo” to the manufacturer’s designers – they do not follow the generally accepted trends, but are constantly looking for new ideas and successfully implement them. Although our hero is not the pinnacle of a “pretty” onion, he cannot be sure of originality.

We start by tradition from above. As you can see, here we see something like a drip, but the developers christened the atomizer differently. I will say right away that he is not collapsible. The dome is plastic, drip type is non-removable. The internal construct resembles a drip – the coil is installed horizontally, is blown from two sides. At the same time, airflow adjustment is present – in the manner of a regular drip – dome rotation.

Two types of atomizers are offered – the resistance of the installed spirals varies. the connector is not the 510th, in the center of the pin you can see the hole for the fluid supply.

iPV V3-mini kit - again, the designers are original ...

We turn to fashion, this is a fairly compact instance. From the decor – a completely original form factor and bright plastic inserts. There is no point in starting up conversations.

The proposed design palette is very extensive. In addition to the above-mentioned panels, the color of the main body also changes.

iPV V3-mini kit - again, the designers are original ...

The control panel is focused on the front side. At the top of the fire button snugly snuggled in, under it a small display and a pair of control keys.

Built-in battery of decent capacity – it’s understandable the functionality of this instance is remarkable, but more on that later. Charging current is unknown – presumably it will be in the region of 1A. The causal connector flaunts at the bottom of the device.

Leave a Reply

Your email address will not be published. Required fields are marked *