Eleaf iJust 21700 with ELLO Duro – another look from the outside and from the inside
Since the iJust mega series of devices is popular among beginner vapers, as well as those who do not want to especially immerse themselves in the “jungle” of vape wisdom, we decided to talk about it again. Moreover, today we will study it not only from the outside, but also from the inside.
Eleaf iJust 21700 with ELLO Duro
Dimensions: whale fully – 148 x 25mm (version 5.5ml) / 130.5 x 25mm (version 2ml)
Weight: 112g (set completely)
Case material: stainless steel
Power: 1 x 18650/1 x 20700/1 x 21700
Output power: up to 80W
Operating mode: POWER
Supported resistance: 0.1 – 3.0Ω
Protection:low / high resistance, overheating, short circuit, reverse polarity, overcharge / overdischarge
Connector type: steel 510, gold-plated pin, spring-loaded
Screen / diagonal: no
Micro-USB port / charging: yes
Color: see photo below
ELLO Duro Atomizer (version 5.5ml / version 2ml)
Case material: stainless steel Atomizer
type: maintenance-free
Evaporators: all evaporators of the HW series
Capacity: 6.5ml / 2.0ml
Diameter: 25mm
Height: 54mm with drip type / 50mm with drip type
Connector: 510, pin gilded
Weight:57g / 51.5g
Color: see photo below
Options
– iJust 21700 mod
– ELLO Duro Atomizer (version 5.5ml / version 2ml)
– replaceable evaporator 2pcs 0.2Ω HW-M2 / HW-N2
– QC USB cable
– spare glass
– spare parts
– adapter for battery size 18650
– user manual
– warranty card
The first thing that meets the newly minted owner when opening the desired box is the smell. You should know this characteristic stench, which often accompanies goods produced in the Middle Kingdom. However, there is some hope that the current production copies will be deprived of this unpleasant amber.
So, the new hijast looks pretty interesting, one might even say stylishly. But still, the owner will not leave the feeling that he is very massive, especially when compared with his predecessors. The weight naturally increased, and if you add to it a 21700-type battery, we get a weighty club at all, which can be served if something happens.
The capacity of the complete tank is slightly changed, and not for the better. The bulb has also undergone changes, now it is made of acrylic, and the profile looks original. It is supposedly shockproof and is not subject to scratches and abrasion. The lid has retained the previous sliding construct, under it is the only, but sufficient, opening for refueling. The airflow adjustment is standard, the dimensions of the air inlets have not changed either.
Replaceable evaporators are new, they are both mesh, but in the first case it is a classic grid, and in the other, perforated steel. They implemented an innovative technology – blowing around the entire perimeter from the inner mesh shaft.
The pipe model itself looks recognizable, except that the “engraving” surrounding the body has changed. The metal itself is pretty thin. The landing pad is steel, designed for atomizers with a diameter of 24 mm, however, the 25 mm can sit here with a certain aesthetics due to peculiar notches. Notch against sticking is present.
Our hero now eats with replaceable batteries – so he can digest both the 18650 with the complete adapter, and 21700, and even the undeclared 20700. Moreover, the latter do not hang out inside. The battery compartment cover is screwed up, the negative contact in it is spring-loaded.